Back

JT 5112/RMIc

Rack mount
15 MHz TCK max
Daisy chaining possible
56 digital I/O Channels with OVP, 8 analog Channels
Rack Mount

Compact 64 channel Mixed I/O Scan (MIOS) module for use in the JT 57xx/RMIc 19″ rack-mount chassis.

Add mixed-signal stimulus and measurement capabilities to your JTAG test system with the JT 5112/RMIc MIOS module. Measure and source analog values up to 30V on up to eight channels. Digital I/O on up to 64 channels – also features frequency measurement capability and user programmable functions..

With 56 purely digital channels and 8 digital/analog channels, connections on the JT 5112/RMIc are made via standard 0.1″ IDC plugs on the front of the unit. The voltage levels of the signals on the I/O banks can range from 1.05V through 3.60V @ ±8mA.

Special functions include frequency generation (1 ch), frequency measurement (16 ch) and pulse width measurement (1ch). Over Voltage Protection (OVP) is present on the digital I/O pins up to 0.6V over the set voltage with a maximum of 6V.

Three other models of the JT 5112 are available. A desktop model and two built-in models.

Download Datasheet
Request a Quote
Get advice
Free trial
  • Compact 64 channel digital/analog I/O system
  • Rugged construction
  • Supports high clock (TCK frequencies)
  • Reconfigurable FPGA for custom bus functions
  • Software set (SCIL) functions
  • 64 channels in total
  • 56 channels always digital
  • 16 frequency measurement channels
  • 8 analog I/O (taken from 64 total)
  • Standard IEEE 1149.1 control interface
  • Choice of bench or fixture (/FXT) version.
  • 64 I/O channels in total
  • Digital output range 1.05V – 3.6V
  • 8 Analog Input or Output channels (taken from channels 57- 64)
  • Analog accuracy ± (0.7% + 24mV)
  • Analog range 0.00V-30.00V or -15.00V-15.00V
  • Frequency measurements, range 0- 200 MHz (channels 33-48)
  • Pulse width counter, range 4 – 8192 nS (channel 35 only)
  • Frequency generator, range 0 – 62.5 MHz (channel 33 only)

Extends the capability of you JTAG system with digital analog and frequency measurement options. Features reconfigurable (via CoreCommander) FPGA kernel to allow custom functions such as high-speed memory access, flash programming, I2C control, CAN bus etc..

We are boundary-scan

We will ensure that your organisation gets the maximum return on investments and receives the greatest benefits from this technology. Look through our website and support section for whatever kind of information you might need and feel free to contact us if the answer to your question is not provided.

Support