Rugged, dependable, fast: boundary-scan controllers

All of our hardware controllers are designed by us and built to our specifications in an ISO9000-certified factory.  (And all are fully tested with boundary-scan.) Our controllers have amassed an excellent record of reliability in mission-critical applications. The DataBlaster JT 37x7 series is available in three application levels; 3707, 3717 and 3727 and a wide variety of modern form factors designed to meet the needs of every test development lab and production line:

• JT 37x7/TSI: Triple-serial interface with USB (1.1 and 2.0), Ethernet and Firewire connectivity

• JT 37x7/PCI: Plug-in for PC installations

• JT 37x7/PCIe: Plug-in for PC installations using the PCI Express format

• JT 37x7/PXI: 3U form factor for PXI/PXI Express-based test systems

All of the DataBlasters run at a 40 MHz sustained TCK rate, and are equipped with our 4-TAP QuadPOD featuring high signal integrity, four spare I/Os, and individually programmed voltage-levels.

The same DataBlaster performance is available in the Rack-Mountable Instrument, JT 37x7/RMI. For more information on RMI, visit our Instruments page.

Besides the Data Blasters, you can choose the economic Explorer JT 3705 for less demanding performance requirements. The JT 3705 / USB provides two TAPs with programmable voltage levels, interfaces to the PC's USB port, and runs at a TCK rate of up to 6 MHz. TAPs can be synchronized for test purposes and are suitable for running a complete battery of board tests including IEEE 1149.1, 1149.4, and 1149.6 as well as PLD programming and low-volume flash programming. The original version of the JT 3705, which provides two TAPs and interfaces to the PC's parallel port, is also available.

Check out our hardware gallery for more boundary-scan controllers.